Publicité
1.6
Approved batteri and chargers
Battery pack: 10S4P-UR18650RX.
Chargers: FW8060/48, BC500.
1.7
Maintenance
All necessary operating, maintenance and repair procedures must be performed by qualified person-
nel or by Nilfisk Service Centers. Only original spare parts and accessories must be used.
Contact Nilfisk for service or to order spare parts and accessories, specifying the machine model,
product code and serial number.
1.8
Charging of the battery pack
The battery pack is delivered approx. 30 % charged because this gives a long storage time and a
safe transportation.
Connect the charger directly to the battery pack or mount the battery pack in the charger depending
on the application. (See the User guide for the charger or for the appliance).
The battery pack should be charged in a dry environment and within an ambient temperature range
of 0°C to +40°. (32°F to +104°F)
The battery pack has an integrated Battery Management System, which protects the cells against
abusive charging and discharging. The system also maximizes the battery life by balancing the cells
during charge.
1.9
Storage of the battery pack
A fully discharged battery pack should not be stored uncharged for more than 4-weeks maximum.
A 30 % charged battery pack (2 Green LED's) can be stored for up to 24 month in a temperature
range from -20 to +40°C. (-4°F to +104°F)
Failure to observe the guide line for storage, might lead to a defect battery pack, which must be dis-
posed of. (See section Disposal of Battery pack).
For details of after sales service contact Nilfisk directly.
2.0
Warranty
Our general conditions of business are applicable with regard to the guarantee.
Unauthorised modifications to the appliance, the use of incorrect brushes in addition to using the ap-
pliance in a way other than for the intended purpose exempt the manufacturer from any liability for
the resulting damage.
As specified in European Directive 2012/19/EU on old electrical and electronic appliances, used
electrical goods must be collected separately and recycled ecologically. Contact your local au-
thorities or your nearest dealer for further information.
SCRAPPING
Scrap the machine by the qualified waste treatment institution.
Before the machine is scrapped, please take away and segregate below subassembly that relevant
laws and regulations request must be disposed in appropriate way.
- Battery
- Plastic hose and plastic parts
- Electrical and electronic components (*)
(*) Please contact our company service center destroying any electrical and electronic components.
Original instruction
11
Publicité
