Publicité
All manuals and user guides at all-guides.com
Wheel Kit OperatiOn
Removing the power supply from the wheel cart
1. Lift the locking pin (1) straight up.
2. While holding the cart, push the power supply (4) toward the front of the cart until the power supply stops.
3. Push the rear locking mechanism handle (2) forward toward the casters (3) until the mechanism stops.
The front and rear feet of the power supply are disengaged from the front and rear tabs of the locking mechanism.
4. Carefully lift the power supply handles (5) to remove the power supply from the cart.
5. Pull the rear locking mechanism handle to the rear of the cart and replace the locking pin.
Power supply
5
front panel
4
Power supply
rear panel
3
1
2
4
Field Service Bulletin
Publicité
