Publicité
When opening covers or removing casing parts you may expose live
parts. Capacitors inside the device may still carry voltage even
though they have been disconnected from all voltage sources.
In case the pump pumped fluids, which leave residue, it should be
thoroughly cleaned after use with clean water. Sand, mud or
suspended sediment in the pumped water can affect its delivery
rate.
To thoroughly clean the turbine wheel, unscrew the screws and take
apart the base from the upper housing. Clean dirt with a brush etc.
Rinse the pump with clear water.
Never use corrosive or acidic cleaners to clean the pump.
Keep the suction base (7) free from dirt and blockages of any kind to
prevent clogging.
Store the pump in a dry place that is protected from dust, dirt and
frost. Make sure the pump is dry before storing it for long time.
The pump does not contain any parts serviceable by you. Do not
disassemble the pump and do not try to repair it yourself. Repairs
must be done by a professional only.
Carry the pump only by the carrying handle (1). Never carry, or lift
up the pump by the power cord.
Using
19
Publicité
