Publicité
Intended Use
The submersible sump pump has been designed for pumping clear
and dirty water. It is not intended for delivering salt water, corrosive,
easily flammable or explosive liquids (e.g. petrol, paraffin, thinners,
etc.), faeces, oil, heating oil or foodstuffs. The pump can be used for
delivering water, containing floating organical particles such as
leaves, paper, plant scraps or firm particles up to a diameter of
35 mm.
The submersible sump pump can be used for dry up garages,
cellars, basements, swimming pools, tubs, tanks, springs, wells etc.
When immersing the pump into a well, make sure the diameter of
the well is not smaller than 40 x 40 x 50 cm so the float switch (4)
can float freely.
The pump is not designed for commercial continuous operation.
The intended use also includes an operation following the operating
instructions. Any use beyond these parameters (different media,
applying force) or any changes (reconstruction, no original accesso-
ry) can lead to serious risks and is regarded as use that is contrary
to the intended purpose.
Before first Use
Unpack the submersible sump pump and check all parts for any
damage in transit. Keep packaging materials out of reach of children.
There is risk of suffocation!
Preparation
1. Before each use, check the pump and the power cord for any
damages. Do not use the pump in case of damages.
2. Screw the universal hose adaptor (5) on the water outlet opening
(6).
3. Tightly attach or screw on the hose (not included) to be used for
pumping off the water to the hose connection (5) of the hose
adaptor. If required, use Teflon tape for sealing.
Using
16
Publicité
