Télécharger Imprimer la page

Braun Silk-expert Pro 3 PL3122 Mode D'emploi page 18

Publicité

Trouble shooting
The following troubleshooting guide may help you solving initial problems you may experience with this
device.
Problem
Power bars do not light up when treatment window
is placed on the skin.
The device doesn't work on small areas.
Flashing sequence slows down.
On the power bar, only the first LED illuminates
red.
Gentle mode indicator is flashing.
First LED on power bars flashes red.
The power bars show an unfamiliar pattern of one
red LED shining along with individual white LEDs.
All white LEDs flash.
The device is broken, cracked or appears
defective.
Disposal
The product contains recyclable electronic waste. To protect the environment, do not dispose of it
in the household waste, but take it to appropriate local collection points.
Subject to change without notice
Guarantee
We grant a 2 year guarantee on the product commencing on the date of purchase. Within the guarantee
period we will eliminate any defects in the appliance resulting from faults in materials or workmanship, free
of charge either by repairing or replacing the complete appliance at our discretion.
This guarantee extends to every country where this appliance is supplied by Braun or its appointed
distributor.
This guarantee does not cover: damage due to improper use, normal wear or use as well as defects that
have a negligible effect on the value or operation of the appliance. The guarantee becomes void if repairs
are undertaken by unauthorized persons and if original Braun parts are not used.
To obtain service within the guarantee period, hand in or send the complete appliance with your sales
receipt to an authorised Braun Customer Service Centre (address information available online at
www.service.braun.com).
For UK only:
This guarantee in no way affects your rights under statutory law.
18
Solution
Make sure the device is connected to an electrical
outlet. Press the gentle mode button (4) to activate
it.
Ensure both skin tone sensors are in full contact
with the skin. If needed, move the device in a way
that both skin tone sensors get skin contact.
Use the precision head* (11) on small, hard-to-
reach areas (*if available).
Make sure both skin tone sensors are in contact
with the skin.
Device is in heat-protection mode. To get back to
normal speed, allow device to cool down.
Invalid skin tone reading. Your skin is either too
light or too dark. The device will not flash.
Device is deactivated. Press the gentle mode
button to re-activate it.
Head (10 or 11) has been taken off. Re-attach it.
Device error. Device will not operate.
Unplug and reconnect. If error persists, contact a
Braun Service Centre for repair.
End of product lifetime. Maximum number of
flashes (300,000) has been reached.
Do not use if the handle, the base station or the
main cord is damaged. If you are in any doubt
about the safety or suspect it is damaged in any
way, you must not use it.

Publicité

loading

Ce manuel est également adapté pour:

Silk-expert pro 3 6032