Product Overview; Setting Up The Device; Use - DS Produkte 09890 Mode D'emploi

Product Overview

6
5
4
3
1 Heat indicator light
2 Operating light
3 Fat collecting tray

Setting up the device

PLEASE NOTE!
■ Do not put the device under kitchen cabinets or similar. These may be damaged due
to rising steam!
■ The device may only be operated in a horizontal position, never on its side or stand-
ing upright.
1. Always set up the closed device with a clear space at the sides (at least 20 cm) and
clear space above it (at least 30 cm) on a fl at, solid and heat-resistant surface that is
resistant to splashing fat.
2. Insert the fat collecting tray (3) into the bottom part of the housing.

Use

PLEASE NOTE!
■ The device must not be left unattended during operation!
Although the grill plates (4, 5) have a non-stick coating, we recommend gently
greasing them before using them for the fi rst time. Do not use cooking spray, as
this can damage the non-stick coating!
1. Connect the device to a correctly installed socket. Make sure that the power cord is
not caught in between the plates. Both the operating light (2) and the heat indicator
15
4 Bottom grill plate
5 Top grill plate
6 Handle
EN
1 2