Publicité
MANUAL TIME SETTING:
In some cases after inserting the batteries, the clock may not be able to receive the DCF signal. In this situation,
the time should be set manually.
Press and hold the TIME key for 3 seconds and the "hour" digits will start flashing, press ▲ or ▼ key to
adjust the hour.
Press the TIME key again and the "minute" digits will start flashing, press the ▲ or ▼ key to adjust the
minute.
Press the TIME key again and the "second" digits will start flashing, press the ▲ or ▼ key to clear the
"second" to 0.
Press the TIME key again and the "year" digits will start flashing, press ▲ or ▼ key to adjust the year.
Press the TIME key again and the "dash" between "date" and "month" will start flashing, press ▲ or ▼ key
to shift the position of "date" and "month".
Press the TIME key again and the "month" digits will start flashing, press the ▲ or ▼ key to adjust the
month.
Press the TIME key again and the "date" digits will start flashing, press the ▲ or ▼ key to adjust the date.
Press the TIME key again and then press the ▲ or ▼ key to set the time zone, e.g. when the country time
is faster than DCF time for 1 hour, the zone should be set to +1.
Press the TIME key again and then press the ▲ or ▼ key to choose the language for the Day of week.
Press the TIME key again to return to normal display.
ALARM SETTING:
Press the ALARM ON/OFF key.
Press and hold the ALARM key for 3 seconds and the "minute" digits of alarm time will start flashing, press
▲ or ▼ key to adjust the minute.
Press the ALARM key again and the "hour" digits of alarm time will start flashing, press ▲ or ▼ key to
adjust the hour.
Press the ALARM key again to return to alarm time display.
GB 2
Publicité
