Publicité
EXERCISE METER
FUNCTION KEYS:
MODE
Press this button to change display or choose the window needs to be set.
In meter status, hold this button for 3 seconds to reset all values to zero.
SET
Set value of TIME (TMR), DISTANCE (DIST), CALORIE (CAL) and PULSE
when not in scan mode.
RESET
Press to reset TIME (TMR), DISTANCE (DIST), CALORIE (CAL) and PULSE.
In meter status, hold this button for 3 seconds to reset all values to zero.
FUNCTIONS:
SCAN
Press MODE button until "SCAN" appears, and meter will rotate through all 6 functions: TIME (TMR),
CALORIE (CAL), SPEED (SPD), DISTANCE (DIST), TOTAL DISTANCE (ODO) and PULSE. Each
will be displayed for 6 seconds.
SPEED (SPD)
Displays speed, range is 0.0 ~ 999.9 MPH.
TIME (TMR)
Counts the total exercise time from start to the end, range is 00:00 ~ 99:59 Minute.
DISTANCE (DST)
Counts the total exercise distance from start to the end and the range is 0.0 ~ 999.9 MILE.
CALORIE (CAL)
Counts the total exercise calories consumed from start to the end, range is 0.0 ~ 999.9 KCAL.
TOTAL DISTANCE (ODO)
Count the total distance after installing the batteries.
PULSE
Hold the pulse sensors to read your heart rate per minute. The range is 40 ~ 240 BPM.
AUTO START/STOP
Meter will turn on when you press any key or start exercise.
After 4 minutes of inactivity, the meter will turn off.
COUNTDOWN
The functions of TIME (TMR), DISTANCE (DIST) and CALORIE (CAL) can be set to countdown.
Press MODE to select the function, then press SET to adjust the value. Make sure you are not in
SCAN. Start pedaling to start the countdown. When the countdown value goes to zero, the meter
will beep for 6 seconds.
19
Publicité
