Publicité
GB
Please read this instruction manual
before using the device for the first
time and comply with it.
Keep this instruction manual for
future reference or for subsequent
possessors.
Technical Specifications
Art.
LED light:
Battery specification:
Voltage of mains adapter: 230V ~ , 50/60Hz
Voltage of car charger:
Charging time:
Operating time:
LED intensity:
Service life of LED:
Degree of protection:
Storage temperature:
Operating temperature:
Operating Instructions
On/Off switch: Press the On/Off switch to switch
the flashlight on/off.
Lamp head: Hold the flashlight with one hand by
its shaft and move the lamp head with the other hand.
This enables adjustment of the lighting angle and the
lighting area to your requirements.
Operating modes: Select the respective operating
mode in the following sequence by pressing the On/
Off switch:
a. Powerful light
b. Weak light
c. Flashing
6 6
For Your Safety
0827 805 3xx
High Power LED
Li-Ion, 3.7V, 2,200mAh,
8.14Wh
4.2VDC, 0.8A
5.5 hours
5.5 hours
320lm
30,000 hours
IPX6
0°C ~ 20°C
–10°C ~ 50°C
Warning - Do not look directly into
the light emitting lamp - Risk of eye
injuries!
Always only use the charger recommended by
the manufacturer to charge the lamp. The use of a
NON-recommended charger can lead to a fire and
destroy the lamp.
d. SOS
In any of these operating modes, the flashlight is
switched off by pressing the On/Off switch once
more.
Charging Process
■
Before taking the hand lamp into service for the
first time charge it for 6-8 hours.
■
Fully charge the hand lamp before it is stored for a
longer period.
■
Switch lamp off during charging.
■
The LED (indicator light) of the lamp switches to
RED during charging.
■
If charging is completed, the LED (indicator light)
of the lamp switches to GREEN.
■
If the indicator does not turn CONSTANT RED,
unplug the charger & then try again.
Publicité
