Troubleshooting
Radio reception
is poor
No sound
The unit does not
turn on
Radio hangs or freezes
Product Specifications
Specifications
Power Input
Audio Output
FM Frequency Range
DAB/DAB+ Frequency Range
Playing Time
Built-in Rechargeable Battery
Disclaimer
Updates to firmware and/or hardware components are made regularly. Therefore some of the instructions,
specifications and pictures in this documentation may differ slightly from your particular situation. All items
described in this guide are for illustration purposes only and may not apply to your particular situation.
No legal right or entitlements may be obtained from the description made in this manual.
Declaration of Conformity
Hereby, Philex Electronic Ltd. declares that the radio equipment model i-box Attune for wireless reception in domestic
premises is in compliance with the Radio Equipment Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address: www.philex.com/doc
Technical Support
For further help, advice, information visit www.iboxstyle.com/support
10 | i-box
Solutions
Check that the antenna
is extended for the
maximum signal strength
and improved reception.
Check if the volume is
turned down. Increase the
volume.
The battery is flat and
the unit is not securely
connected to a powered
USB socket.
Use the power reset switch (16) to turn off the Attune:
1. Insert a thin object for example a pin or paperclip into the RESET hole (16) on the
back of your Attune.
2. Short press the ON/OFF key (3) to turn the Attune back on.
5V1.5A
3W RMS
87.0 MHz to 108.0 MHz
174.928MHz (5A) - 239.200MHz (13F)
Up to 12 hours at 50% volume
Lithium-ion 2,200mAh
Adjust the antenna
direction to improve the
signal. Move the unit
closer to a window.
Check that the unit is
switched on.
Connect to a powered
USB socket.
Check that the unit is
not close to microwaves,
fluorescent lights or other
equipment which may
cause interference.
Try tuning to another
radio station.
Connect to a higher
output USB socket.