Télécharger Imprimer la page

COURANT CHM-1570 Guide De L'utilisateur page 8

Publicité

Care, Cleaning, and Maintenance
Aside from removing the whisk, beaters or dough hooks, there is no disassembly re-
quired to clean this unit.
Always switch off the appliance and unplug it before cleaning.
1.
Switch the mixer off (set the speed dial to 0) and unplug it.
2.
If needed, gently tap the beaters , whisk or dough hooks on the side of the bowl
to remove any excess mixture.
3.
Eject the whisk, beaters or dough hooks by pressing the down on the speed dial
while it is set to 0.
4.
Wash the beaters, whisk or dough hooks in soapy water.
5.
Using a cloth dampened with warm water and detergent, carefully clean the mix-
er. Make sure you do not allow water to seep into the mixer. Do not use abrasive
cleaning tools or harsh cleaning solutions.
6.
Dry the surface with a dry cloth or paper towel.
CAUTION
: NEVER IMMERSE THE UNIT IN WATER. THIS APPLIANCE HAS ELECTRICAL
COMPONENTS AND SHOULD NEVER COME IN CONTACT WITH WATER.
Any servicing of this mixer should be performed by an authorized service representa-
tive. The motor of your mixer has been lubricated at the factory. Any additional lubri-
cant may cause a fire hazard.
STORING YOUR HAND MIXER
Unplug the mixer and wrap or coil the electrical cord with a twist-tie. Store the mixer
on its heel rest in a clean, dry location such as a cabinet or shelf. Store the beaters,
whisk, and dough hooks in a drawer.
Product Specifications
Rated voltage
120V
Frequency
60Hz
Rated Power
250W
8

Publicité

loading

Produits Connexes pour COURANT CHM-1570