Operation
CAUTION
Install the wall mount on a hard concrete wall.
• If it is installed on a wood or plaster wall, the product may fall.
Assembling the wall mount
1
To disassemble the wall mount, follow steps in reverse order.
Installing the wall mount
Wall mount hole
3
4
Screws
Screw Anchors
12
English
Untitled-1 12
1
2
113 cm
5
2
1. The wall mount installation should be set so the
top of the wall mount is 113 cm from the floor.
2. Using the wall mount as a template, mark
where the screw holes will be placed.
3. Drill the holes to a depth of 50 mm using a
6 mm drill bit, and put the provided screw
anchors into the hole.
4. Fix the wall mount to the wall with the provided
screws.
5. Plug in the wall mount, place the vacuum
cleaner into the wall mount, and then confirm
that the battery level indicator turns on.
2023-12-13
10:56:13