Télécharger Imprimer la page

Sharp SJ-TE172M1XS-EU Guide D'utilisation page 10

Publicité

appliance. Parts may vary according to the
appliance model.
A) Freezer compartment
B) Refrigerator compartment
1) Freezer shelf
2) Thermostat box
3) Refrigerator shelves
4) Crisper cover
5) Crisper
6) Left & Right stays
7) Bottle shelf
8) Adjustable door shelf * / door shelf
9) Door shelf
10) Egg holder
11) Ice box tray
10) Plastic ice scraper *
General notes:
Fresh Food Compartment (Fridge): Most
efficient use of energy is ensured in the
configuration with the drawers in the bottom
part of the appliance, and shelves evenly
distributed, position of door bins does not
affect energy consumption.
Freezer Compartment (Freezer): Most
Efficient use of energy is ensured in the
configuration with the drawers and bins are
on stock position.
3 USING THE APPLIANCE
3.1 Thermostat Setting
The thermostat automatically regulates the
temperature inside the cooler and freezer
compartments. Refrigerator temperatures
can be obtained by rotating the knob
to higher numbers; 1 to 3, 1 to 5 or SF
(Maximum numbers on the thermostat
depends on your product.)
Important note: Do not try to rotate
the knob beyond position 1, it will stop
your appliance from working.
* In some models
EN - 9
Super switch
(In some models)
Lamp cover
(The images are representative)
Thermostat settings:
1 – 2 : For short-term storage of food
3 – 4 : For long-term storage of food
5 : Maximum cooling position. The
appliance will work longer.If required,
change the temperature setting.
If device has SF position:
• Turn the knob to SF to freeze fresh
food quickly. In this position, the freezer
compartment will operate at lower
temperatures. After your food freezes,
turn the thermostat knob to its normal
use position. If you do not change the
SF position, your appliance work will
automatically return to its last used
thermostat position according to the
time indicated in the note. Return the
thermostat switch to the SF position
and return it to normal use according
to the time indicated in the note.If the
thermostat switch is in the SF position
when your appliance is first started, your
appliance work will automatically return
to the operation in the thermostat-3
position according to the time indicated in
the note.
The super mode will be cancel
automatically after max 48 hours.
3.2 Temperature Settings Warnings
• Your appliance is designed to operate in
the ambient temperature ranges stated
in the standards, according to the climate
class stated in the information label. It
is not recommended that your fridge is
operated in the environments which are
outside of the stated temperature ranges.
This will reduce the cooling efficiency of
the appliance.
• Temperature adjustments should be
Thermostat knob

Publicité

loading