BraunAbility Turny Evo Instructions D'utilisation page 41

Troubleshooting
Hand held control /
- does not light up ............................................
- shows warning/fault message .................
Unusual noises heard during operation .....
- The hand held control must be in "sleep mode",. Open the door.
- Check that the wiring to the hand held control is connected and undamaged.
- Check that the fuse is intact and that the car battery is charged.
- Follow the instructions for "Emergency operation using the emergency kit".
- Identify the message on the following pages and perform the recommended
action.
- Follow the instructions for "Emergency operation by hand held control".
- Follow the instructions for "Emergency operation using the emergency kit".
- Do not use the Turny Evo. Contact your installation technician for an overhaul.
41
Turny Evo
EN