Publicité
1
Clean hood with soap and water in the shown area's prior to
installation of the Hood Protector. Dry hood with a soft clean cloth.
3
A
Center Hood Protector (A) on hood as best as possible. Mark center
5
1
C
K
Install nut inserts (C) into clips (K). Insert screw plugs (B) into the
slots on the underside of the hood. Install clips (K) on hood over
the tape.
PART NUMBER
ISSUE
001
E231SSJ020
3
2
K
B
SUBARU OF AMERICA
DATE
05/03/2021
2
CENTER HOLE
OUTER HOLE
OUTER
SLOT
4
D
1
F
2
3
D
Clean areas shown on the underside of the hood using provided wipe
(F). Install tape (D) provided on hood. Apply tape so approximately
one half of the strip is adhered to the top side and half is adhered to
the underside of hood. Do not discard wipe at this stage.
6
Secure clips (K) onto the hood with large screws (J). Torque 1-2N.
CENTER HOLE
OUTER HOLE
BUMPON
PAGE
OUTER
SLOT
2/8
Publicité
