Publicité
Purpose
Reject an incoming call
Switch between the current caller
and a caller on hold
Cancel a caller on hold
Adjust the volume of the caller's
voice (When private mode is on,
this function is not available.)
Turn the private mode on or off
Phone menu
Menu Item
ANSR
[ON], [OFF]
RING
[ON], [OFF]
BT SETUP
* The contacts on your phone will normally be transferred automatically when the phone is
connected. If they are not, use your phone to transfer the contacts.
Bluetooth audio
Important
• Depending on the Bluetooth audio player connected to this unit, the available operations will be
limited to the following two levels:
– A2DP (Advanced Audio Distribution Profile) can only play back songs on your audio player.
– AVRCP (Audio/Video Remote Control Profile) can perform functions such as playback, pause, select
song, etc.
• The sound of the Bluetooth audio player will be muted when the phone is in use.
• When the Bluetooth audio player is in use, you cannot connect to a Bluetooth telephone
automatically.
• Depending on the type of Bluetooth audio player you have connected to this unit, operation and
information displayed may vary based on availability and functionality.
1
Make a Bluetooth connection with the Bluetooth audio player.
2
Press SRC/OFF to select [BT-A] as the source.
3
Press 4/PLAY to start playback.
Operation
Press and hold
Press the M.C. dial.
Press and hold
Turn the M.C. dial during the call.
Press BAND/
Description
Select [ON] to answer an incoming call automatically.
Select [ON] if the ring tone does not come out from the car
speakers. Depending on the connected phone, this function
may not work.
You can adjust various settings for Bluetooth connections. For
details on Bluetooth settings, see page 10.
- 11 -
- 11 -
when a call is received.
.
during the call.
Publicité
