Watts Febco LF866 Serie Instructions D'installation page 2

Kit Components
The retrofit connection kit for installing and
activating the flood sensor includes the items
shown below. If any item is missing, speak with
your account representative about ordering
code 88009415.
Activation module with an 8' 4-conductor electrical cable
Flood sensor with mounting bolts (retrofit kit only)
NOTICE
When installing an air gap, attach the air gap brackets directly
onto the flood sensor.
Requirements
• #2 Phillips screwdriver
• Two ½" wrenches
• 120VAC, 60Hz, GFI-protected electrical outlet
(for kit power adapter), or power source ranging from
12V to 24V
• Wire stripper
NOTICE
The connection kits are suitable for installation on the
specified valve series only.
24V DC power adapter
Ground wire
2