Publicité
•
If you choose a wheelchair fitted with a rear tilt armrest, hold the front end of the armrest as you tilt it
backwards, and lightly push the armrest locking handle with your index finger, and the armrest can be
tilted backwards; when the armrest is restored, tilt it forwards, the armrest lock is inserted on the jack
in the frame, and the handle is automatically reset and locked (see Figure 9).
•
If you are buying a wheelchair with a detachable aluminium alloy leg support, turn the leg support to
lock the handle when dismantling, the leg support can pivot outwards and can be lifted up after pivoting
through an angle; when inserting, align the upper and lower locating holes of the leg support with the
locating pins on the frame and hook it in, then gently pivot it inwards until it automatically snaps back
into place and secures. (See Figure 10)
Version Novembre 2023
Figure 8
Figure 9
Page 16 sur 27
Publicité
