Publicité
Congratulations!
You have chosen to purchase a high-quality prod-
uct. Familiarise yourself with the product before
using it for the first time.
Read the following assembly
instructions and the safety informa-
tion carefully.
Use the product only as described and only
for the given areas of application. Store these
assembly instructions carefully. When passing the
product on to third parties, please also hand over
all accompanying documents.
Scope of delivery (fig. A)
1 x fabric shoe rack, unassembled
1 x assembly instructions
Technical data
Dimensions: approx. 84 x 66 x 35cm (w x h x d)
Material: 100% polyester
Maximum load per storage compartment:
1kg
Date of manufacture (month/year):
10/2019
Intended use
The product is designed for use indoors. The prod-
uct is not intended for commercial use.
Safety instructions
Danger to life!
• Never leave children unsupervised with the
packaging material. Risk of suffocation.
Risk of injury!
• Before using the product check for correct
stability.
• Position the product on an even surface.
• The product may only be used under adult
supervision and not as a toy.
• Check the product for damage and wear
before each use.
6
GB/IE/NI
• Make sure that the product is assembled cor-
rectly and in accordance with these assembly
instructions. If assembly is not performed
correctly this can lead to injuries and may also
compromise safety and function.
• Ensure that the wall used for wall assembly of
the product is a suitable one. Unsuitable wall
surfaces can lead to injury/damage.
Assembly
Important: The product should be assem-
bled by at least two people.
To assemble the product you need the following
tools, which are not included in delivery: Phillips
screwdriver and a suitable drill.
1. Assemble the product as shown in figs. B-C, on
a flat and even surface.
Note: You can fasten the open and rolled-up
front with the aid of the two hook-and-loop fasten-
ers to protect it against falling down.
2. For optimal stability the product must be
mounted on a wall using appropriate assembly
materials (not included in delivery). Drill holes
into the wall at the level of the holes in the rods
(3) and attach the product to the wall (fig. D).
Note: Consult your retailer regarding what
assembly materials (dowels and screws) to use for
your masonry.
Note: Do not place any objects on the product.
Stacking the product
You can stack two shoe racks one over the other,
as shown in fig. E.
1. Assemble both shoe racks.
2. Remove the cover caps from the corner pieces
(6) on one of the shoe racks and the foot caps
(8) on the other one.
3. Insert the shoe rack without foot caps into the
corner piece of the other one.
Important! Stack no more than two shoe racks
on top of each other.
Publicité
