Publicité
Specifications
Product Name: FS-R4P
Compatible Transmitters: Transmitter with ANT protocol
Adaptive Models : 1:18 simulation cars, climbing cars
PWM Channels: 4
RF: 2.4GHz ISM
2.4G Protocol: ANT
Antenna: Single bulit-in antenna
Input Power: 3.5-8.4V/DC
Working Current: 70mA(5V)
Overview
Binding
The receiver automatically enters the binding state once it is powered on. Follow the steps below to bind
with the transmitter.
1. Power on the transmitter while pressing the BIND button, then the transmitter enters the binding mode.
At the time, The G.LED on the transmitter flashes quickly, then release the BIND button.
2. After the receiver is powered on, it will automatically enter the binding mode if it is not connected to
the transmitter in 1 second;
3. After the binding is finished, the LED of the receiver is solid on.
Notes: Put the transmitter into binding mode first, and then put the receiver into its binding mode. If the
binding is not finished within 10s,
the LED of the receiver will enter its slow flashing state.
Data Output: PWM
Temperature Range: -10℃ ~ +60℃
Humidity Limit: 20%~95%
WaterProof: PPX4
Distance: >150m(Ground distance without inference)
Online Update: NO
Dimensions: 22.6mm*20.6m*25.5mm
Weight: 6g
Certification: CE, FCC, UKCA
Publicité
