Publicité
The LCD can display the following error codes:
Error
Problems
Code
Er0
Temperature sensor
cutting out.
Er1
Battery protection
cutting out.
Er2
Fan overload cutting out.
Er3
Motor start error (the
rotor is blocked or the
differential pressure in
refrigeration systems is
too high).
Er4
Compressor speed error
protection.
Er5
Thermal cut-out
(overload or internal
temperature too high).
Er9
Temperature sensor
disconnection.
32
Solution
Contact a EUROM
authorized professional.
Change to another power
supply.
Contact a EUROM
authorized professional.
1.
Disconnect the power.
2.
Wait for 30 minutes.
3.
Switch on the device.
1.
Remove food and/or
drinks.
2.
Set a higher
temperature.
1.
Move refrigerator to a
well-ventilated place.
2.
Allow the compressor
to cool.
3.
Power on the device.
Contact a EUROM
authorized professional.
Safety instruction
Do not use the
device.
Always switch off
the device before
changing it to
another power
supply.
Do not use the
device.
-
-
Always switch off
the device before
moving it.
Do not use the
device.
Publicité
