Publicité
Transport and storage
WARNING
Do not turn on the device immediately after transport. The device must first
stand upright for 30 minutes. This prevents the compressor from running dry.
•
Clean the device before storing it.
•
Lift the device by the handles.
•
Store the device in its original packaging in a cool, dry and dust-free area.
Assembly
The device is packed in one box. Remove all packaging materials and check that the device is
not damaged. Do not use the device if it is damaged, but always contact your supplier. Keep
the packaging for safe storage and transport. This device is already assembled.
Installation
CAUTION
Make sure that the main voltage is the same as indicated on the identification
label of the device. All electrical connections must stay dry under all
circumstances.
Power plug (100-240 V)
Figure 5
25
Publicité
