Publicité
1.
Make sure the device is on a flat, level and steady surface.
2.
Make sure that all three ventilation grills (Figure 5, pos. 7) have at least 5 cm of
ventilation space.
3.
Place the AC cable (Figure 5, pos. 2) into of the AC/DC adapter (Figure 5, pos. 1).
4.
Place the AC/DC adapter plug (Figure 5, pos. 5) into the power supply of the device
(Figure 5, pos. 6).
5.
Place the power plug (Figure 5, pos. 4) into an easily accessible wall socket
(Figure 5, pos. 3).
Auxiliary power plug (12 V / 24 V)
Figure 6
1.
Make sure the device is on a flat, level and steady surface.
2.
Make sure that all three ventilation grills (Figure 6, pos. 1) have at least 5 cm of
ventilation space.
3.
Place the power connector (Figure 6, pos. 3) into the power supply of the device
(Figure 6, pos. 2).
4.
Place the auxiliary power plug (Figure 6, pos. 4) into an easily accessible 12 V or 24 V
auxiliary power supply in a vehicle or vessel.
26
Publicité
