air&me Orain Notice D'utilisation page 6

LIFT PUMP CONNECTION
Orain have a lift pump hole evacuation (none included).
Open the tank, put the pump in it, place the hose and the power cord outside thanks to the hole
evacuation. Replace the convex top before pushing the tank into the product.
CLEANING PRE-FILTER
The pre-filter capture big dust and prolong the efficiency of
the product. It's remended to clean it every months.
Pull the pre-filter handle to the top and remove it. Clean it with
a soft brush before repace it.
AUTO DEFROST FUNCTION
The usage temperature of the dehumidifier is from 5°C to 50°C. It's important to noticed that
when this function starts the efficiency is reduced. For optimal use make sure you have a
temperature between 15°C and 35°C.
MAINTENANCE
1. Ensure the machine is swich off and
unplugged before maintenance.
2. Do not immerse the machine in water or
any liquid.
3. Do not use abrasive, corrosive
flammable cleaners to clean any part of
the product.
2. Use a soft fabric to remove dust from the
surface of the unit air inlet/outlet.
3. Clear every mounth the tank with an
appropriate cleaning product or white
vinegar to avoid any limescale.
10
STORAGE
1. Clean and empty the tank and assure
that the product is completely dry.
2. Never store the product with water on the
tank to avoid any bacteria proliferation.
or
3. The product needs to be protected to
dust and storage in a dry and clean room.
NONE INCLUDED ACCESSORY
To remove the water on a raise evacuation
you can add the air&me lift pump. Pump it
up could remove 450L/h on a height of 3
meters. With its small size, it could be easily
placed into the tank.
PUMP IT UP
www.airandme.fr
FAQ
Situation Reason
> The socket is not correctly
pluged. Is there a power
outage.
> The home leakage switch
The product
or fuse cut off.
don't work
> The water tank is full.
> The water tank is not
correctly placed.
> The pre-filter is dirty so that it
blocks the airflow.
> The air inlet/outlet of the
machine is blocked by
Decrease in
something.
performance
of the product
(less water in
the tank)
> The temperature is too low.
> The humidity level is already
low.
> There is anything stuck on
the fan in the air outlet.
Significant noise
> The machine have a
fonctionning problem.
Solution
> Plug correctly the socket with
the right voltage.
Avoid multi-taps.
> Emplty the tank.
> Push the tank in its right position.
> Clear the pre-filter.
> Leave at least 30 cm of space
on the back and sides of the
product, and at least 50 cm of
space above the product.
> Under 15°C the product is in
defrost function. The product
could not works with its optimal
capacity.
> Make sure that any objects could
damage the fan.
> Call your dealer for an after sale
service.
11