Publicité
6. Troubleshooting tips:
Fault
No light on
The machine if not
heated
Temperature is too
high or too low
All manuals and user guides at all-guides.com
Causes
1. No connection to the power
source.
2. Poor wire connection.
3. The backlight lamp is broken
1. The wire in the heating tube is
disconnected.
2. The heating tube has burned
down.
3. Low power supply
The temperature relay has failed
Possible solutions
1. Plug
2. Tighten the screw that
connects the wires.
3. Replace the lamp
1. Tighten the screw that
connects the wires
2. Replace the heating
tube
3. Connect to a power
source with the required
power
Contact your service center
EN
7
Publicité
