Publicité
How to extend and retract the pole
To extend the pole, apply pressure to the clasps and pull apart. Similarly,
press down on the clasps and retract the pole so both clasps meet to fully
retract the tree pruner.
For best results keep pole length at the minimum required to cut branches,
this will ensure a lower center of gravity and an easier cut.
How to cut branches
For best results, use the lopper function on branches up to 40mm thick.
For larger branches use the main saw function.
Maintenance & Repair
*Wipe with a dry cloth after use to
prevent rusting.
*Keep in a dry place to avoid rusting.
*Apply blade oil and lubricants to the
lopper blades to avoid
Don't stand directly under branches being cut
Wear eye protection
Wear protective gloves
Store safely with blade cover on
Do not use the pruner near overhead electricity lines
Before each use, check that all the screws are tight
Do not use while standing on a ladder
A5P | 01
corrosion
Attention！
Max cut 40mm
Publicité
