Publicité
Step 1)
To attach the saw blade, firstly mount the blade on the blade host (points
a & b).
Line the blade's square hole with the square hole on the pole head and
screw tight using the M6 Carriage short Bolt short and M6 Butterfly Nut
provided.
1
2
b)
a)
Step 2)
Align the middle holes of the handle
with the corresponding holes of
the saw head and on the two outer
holes, use the 2 x M5 Short Bolts
and 2 x M5 Butterfly Nuts provided
to screw tight.
Then use the M5 Long Bolt and M5
Butterly Nut to secure the telescopic
pole tightly.
A5P | 01
Publicité
