Publicité
Conference
Local Conference
Log in to the web page and enter [Line] >> [SIP] >> [Basic settings]. Two ways to create a local
conference:
1. The device has two communication channels. Press the Conference key on the call interface.
When selecting the conference number, select the other number of the channel that already
exists.
2. If the device has a communication channel, press the Conference key on the call interface,
enter the number to join the meeting and press the call; after the opposite end is answered,
press the Conference key again to set up the local tripartite conference.
Network Conference
Log in to the web page, enter [Line] >> [SIP] >> [Basic Settings], set the conference mode as
the server mode (default is local mode), and set the server conference room number (This
function requires PBX server support. Please consult your system administrator). See the
method to join a network conference below:
1. Dial the server conference room number from multiplle parties and enter the
password to join the meeting room all at once.
2. The two phones have established common calls. Press the Conference key to invite new
members to the conference. Follow the voice prompt to operate.
Call Park
Press the con gured park key to hold the call; After the Call Park is successful, you can resume
the call by pressing the con gured park key on other devices.
NOTE:
This function requires PBX server support. Please consult your system
administrator.
Pick Up
1. Press the con gured DSS key to pick up the phone.
2. The caller picks up the call and speaks to it.
NOTE:
This function requires PBX server support. Please consult your system
administrator.
12
Publicité
