Teletask AURUS-6 TEMP Manuel Utilisateur page 8

Button functions
Button 1 (Custom):
 'Short press function': can be any function; custom-defined by your
system integrator (e.g.: lights, shades, audio, mood, etc. ...).
 'Long press function' can be any function; custom-defined by your
system integrator (e.g.: switch off all lights, open all shades, switch off
audio, etc. ...).
Button 2 (Custom):
 'Short press function': can be any function; custom-defined by your
system integrator (e.g.: lights, shades, audio, mood, etc. ...).
 'Long press function' can be any function; custom defined by your
system integrator (e.g.: switch off all lights, open all shades, switch off
audio, etc. ...).
Button 3 (HVAC mode):
 'Short press function': can be any function; custom-defined by your
system integrator (e.g.: lights, shades, audio, mood, etc. ...).
 'Long press function': is by default set to select the mode of the
temperature zone if applicable. Normally only available when using
cool/heat air-conditioning systems. Mode examples are
"cool/heat/auto...". It will go to the next available mode in a loop.
AUTO
Button 4 (Preset temperature):
 'Short press function': can be any function; custom-defined by your
system integrator (e.g.: lights, shades, audio, mood, etc. ...).
 'Long press function': is default set to select the preset temperature
(Day, Night, ECO). It will go to the next available preset in a loop.
Day: This is the default preset temperature setting during the day, also called the
'comfort' temperature.
COOL
Day ECO
Page 8 of 30
HEAT VENT
Night
DRY
Manual
(empty)