Software Update; Camera Information - Minox DTC 400 SLIM Mode D'emploi

Software update

If a software update is available for your DTC 400, please
proceed as follows:
Make sure your DTC 400 is switched off ("OFF" func-
tion: main switch (12), in centre position). Copy all the
files needed for updating to your PC into the root list of
a formatted SD card. Insert the SD card into your DTC
400 as described in the section "Inserting the memory
card". Switch your camera to "Setup mode" (SETUP =
setup mode, main switch (12) in top position). In the main
menu, select the menu option "SD card update". Press the
OK button (11) to access the submenu. Using the up/down
arrow keys (11), you can now select "Yes" or "No" and
confirm with OK (11). Select "No" to retain the existing
software version and the camera will return to the sub-
menu. If you select "Yes" and confirm with OK (11), your
DTC 400 will begin installing the update.
The update installation is completed once your camera dis-
plays the MINOX start screen and enters the main menu.
Note: Please note that the process described above
must be followed precisely. Any deviation or infringe-
ment may cause the update configuration to fail. You
may not be able to use the camera. In that case, all
warranty claims will be void.

Camera information

In the main menu, select the menu option "Camera in-
formation" and press the OK button (11). The following
information items are displayed:
46