Language Setting; Mounting The Camera - Minox DTC 400 SLIM Mode D'emploi

this means that either no memory card has been inserted,
it was not correctly inserted or it is not compatible. You
can continue with the camera settings when you return
directly to the main menu.

Language setting

The DTC 400 Wildlife Camera is set to English by factory
default. To change the menu navigation to a different lan-
guage, please follow these steps:
1. Move the main switch (12) to the switch setting
"SETUP" mode.
2. After a short period, the main menu will appear
in English with the first menu option "Live preview"
(highlighted in black).
3. Press the up arrow key three times (11).
4. You are now in the menu option "Language"
highlighted in black.
5. Press the OK button (11).
6. Using the down arrow key (11), choose the language
you would like to use (highlighted in black).
7. Press the OK button (11).
8. The camera returns to the "Main menu". The l
anguage is now set to the one you have selected.

Mounting the camera

On the outer casing of the camera there are two strap
mounts (17) attached to each side which can be used to
mount the camera. The mounting straps included in the
delivery are fed through the strap mounts (17). The cam-
era is fastened with the latches on the mounting straps.
Additionally, the camera can be secured using standard
cables by feeding them through the eyelets provided (18).
37