Publicité
REF.54291
OPERATION
FIRST USE
Select the language (English/Spanish) and press ENTER.
Set the refrigerant type: select one you will use.
Note: You can change the refrigerant type later, but you
need to use another refrigerant tank and make sure the
hoses are completely clean (Please see "Pipe cleaning"
section).
Select the units and press ENTER.
Put 4 kg of refrigerant into the tank.
Preparations before operation
To check if there has enough refrigerant in the tank.
The volume should be 4~6 kg.
To check the quantity of refrigerant inside the tank, press
Empty the used oil bottle.
The display will show the quantity of refrigerant inside the
tank.
Check the automotive A/C system. If there has any leakage,
it must be repaired before using the machine.
Warning! When the machine is running, never run the A/C
system.
ENCENDIDO
· 9 ·
Flushing/recovery
Use this function to flush the A/C system.
After flushing, the machine will automatica-
lly recover oil and refrigerant from the A/C
system.
Refrigerant recovery
Use this function to recover the refrigerant
in the vehicle's A/C system.
Vacuum
Use this function to make the vacuum in the
A/C system.
New oil adding
To fill new oil into the A/C system
Recharging
Use this function to charge the refrigerant
into the vehicle.
Automatic mode
Using this function, the machine will perform
automatically the selected operations.
Database
You can check the amount of refrigerant and
oil needed.
Equipment Maintenance
- Dry-filter exchange
- Pipe-line cleaning,
- Calibration
Discharge non-condensable gases
System function
- Language
- Parameter setting
- Supply main tank
- Change refrigerant type
Equipment info
- System inquiry
- Servicer info
- Equipment info
Help
Descriptions of the alarming code.
Publicité
