Publicité
EN
INSTRUCTION MANUAL
PRODUCT'S PRESENTATION
This machine is designed for flushing, refrigerant recovery,
vacuum, oil injection and refrigerant recharging in the vehi-
cle's air condition system.
It is fully automatic. Once the configuration parameters are
set, the machine will do all the processes without any need
to pay attention to it.
It is suitable for R134a and R1234yf refrigerants and has a
printer to certify the work that has been done.
Features:
- Fully automatic
- Easy to operate.
- With large-size inspection tube with LED backlighting.
- Vertically installed gauges that let the operator be able to
observe the pressure parameters even from inside the car.
- High recycling rate of gas and oil.
- With large size LCD.
- With database and printer
- Program and database can be updated.
SAFETY INSTRUCTIONS
Read carefully this owner's manual before using
the product.
Failure to comply with these instructions could
result in personal injury and/or damage
to the product.
Please keep the instructions for future reference.
The machine is designed to be used and repaired by quali-
fied personnel only.
The machine is designed to be used for R134a or R1234yf
refrigerant. Please note that if you want to change the refri-
gerant you need to use a different tank and make sure that
all the hoses are clean.
Fill the air condition (A/C) system with the quantity of refrige-
rant recommended by the manufacturer.
Check the vehicle user manual to know which type of refrige-
rant uses the vehicle.
Do not mix different type of refrigerant, otherwise it will easily
lead to malfunction of the machine.
Keep away from moving parts, rotating elements and hea-
ting components.
Wear protective clothing gloves and goggles.
The operator must be fully familiar with the vehicle's A/C
system and the operation of the machine.
Check whenever the engine is turned off that the ignition key
is turned to the full off position.
Do not expose the machine to direct sunlight or rain.
Use only in well-ventilated work areas.
Never exceed 30 ° tilt in transit.
Do not touch the high voltage power supply connection.
TECHNICAL SPECIFICATIONS
Type of refrigerant: R134A / R1234YF
Compressor power: 3/8 HP
Compressor capacity: 12,12cm3
Vacuum pump power: 180W
Coolant recover speed: 450g/min (GAS), 800g/min (LIQUID)
Percentage of recovery: 99%
Coolant charge speed: >2 Kg/min
Vacuum pump capacity: 100l/min
Refrigerant tank capacity: 12L
New oil capacity: 280ml
Used oil capacity: 500ml
Working temperature: 10-500
Relative humidity: 085%
Maximum working pressure: 20 BAR
LCD display measurement: 240*128mm
High pressure manometer range: -1 ~ 35bar
Low pressure manometer range: -1 ~ 20bar
Power supply: 220V±10%, 50/60Hz
PARTS LIST
N.
Description
1
High pressure gauge
2
Low pressure gauge
3
Tank pressure
4
Window
5
Printer
6
LCD display
7
Operation panel
8
High pressure port
9
Low pressure port
10
Auxiliary port
11
New oil button
12
Used oil button
13
Used oil bottle
14
New oil bottle
15
Inspection window for vacuum pump
oil level
ASSEMBLY
Connect the red hose to the high-pressure port.
Connect the blue hose to the low-pressure port.
Insert the high-pressure gas adapter (red) to the red hose.
Insert the low-pressure gas adapter (blue) to the blue hose.
Locate in the vehicle the high-pressure valve of the A/C
system.
Connect to this valve the red hose.
Locate in the vehicle the low-pressure valve of the A/C
system.
Connect to this valve the blue hose.
· 8 ·
REF.54291
Publicité
