Publicité
English
General instructions (cont'd)
Guarante
Metrological
checking
Cleaning
Storage
Unpacking
Repacking
Battery
replacement
Warning
8
DISTRIMESURE │ Siège social – 250, Allée des Pleus, ZAC du TUBOEUF 77170 Brie-Comte-Robert
| contact@distrimesure.fr │ Tél: 0149621440 │ Fax: 0149820293 │ www.distrimesure.com
This equipment is guaranteed against any material defect or
manufacturing faults, in conformity with the general conditions of sale.
During this period (1 year), the equipment may only be repaired by the
manufacturer. He reserves the right to carry out repair or replacement of
all or part of the equipment.
If the equipment is returned to the manufacturer, forward transport is at
the expense of the customer.
The guarantee does not apply in the event of:
•
unsuitable use of the equipment or by association with incompatible
equipment
•
modification of the equipment without the explicit authorization of
the manufacturer technical services
•
operation by a person not approved by the manufacturer
•
adaptation to a specific application not provided for in the
equipment definition or in the operating instructions
•
impact, fall or flooding.
Return your instrument to your distributor for any work to be done
within or outside the guarantee.
Periodically wipe the case with a damp cloth and detergent : do not use
abrasive or solvents.
If the meter is not to be used for periods longer than 60 days, remove
the batteries and store them separately.
All equipment has been mechanically and electrically checked before
being dispatched.
However, it is wise to check briefly that equipment was not damaged
during transport. If so, please contact our Marketing Department as soon
as possible and claim carrier legal reserve.
If the equipment is being sent back, please preferably use original
packaging and indicate as clearly as possible the reasons for sending it
back on a note enclosed with the equipment.
When the symbol
batteries as follows :
• Disconnect the test leads from the instrument and turn off the
power.
• Unscrew the screws on back cover, then slide the cover.
• Take out the batteries and replace with new batteries type SUM-3.
• Place back cover and secure by 2 screws.
To avoid electrical shock or damage to the meter, do not get water
inside the case.
appears on the display, replace with new
- +
Earth resistance tester
Publicité
