Settings; General Setup Page; Audio Setup Page - Impecca DVHP-9117 Manuel De L'utilisateur

SETTINGS

1. Press the SETUP button. The setting menu will appear on the screen.
2. Use the directional buttons to select and highlight the function you need to configure. Press the directional
button. Press the ENTER button to confirm the selection.
3. Press the SETUP button to save the settings and exit.

GENERAL SETUP PAGE

This page allows you to configure the TV Screen format, Angle Mark, OSD, Captions, Screen Saver, HDCD, and
Last Memory settings.
TV Display 16:9
Angle Mark On
OSD Lang Eng
Captions Off
Screen Saver On
HDCD 1X
Last Memory Off
Go To General Setup Page
Captions
You can use this feature to display recorded explanatory captions.
Screen Saver
When the unit is in Stop mode for several moments, a screen saver will display if this feature is enabled.
HDCD
You can use this feature to enable playback of High Definition compatible digital CDs.
Last Memory
This feature will enable the DVD player to resume playback from the last point played before the player
was turned off.

AUDIO SETUP PAGE

This page allows you to configure the Audio settings.
Audio Setup Page
Speaker Setup
Spdif Setup
Go To Audio Setup Page
TV Display
Preferences
If TV Display is selected, press the directional button to
enter. Press the directional buttons to select 4:3 or 16:9 to
match the aspect ratio of your TV and then press the Enter
button to confirm your selection. Press the SETUP button to
save the setting and exit.
Angle Mark
You can enable or disable the ability to select different
camera angles when viewing DVDs that offer this feature.
OSD Lang (Onscreen display language)
You can select your desired OSD language from this menu.
Speaker Setup
Preferences
Select Speaker Setup to access the Downmix settings
screen.
Downmix
This sets the audio down-mix mode to convert
multi-channel audio into two channel output. This setting
only affects the Mixed L/R analogue audio outputs.
Spdif Setup
The Digital Audio/SPDIF setting controls the way your
television outputs through its digital audio output port. This
setting affects the output of the Digital Coax Audio output,
or the Digital Optical Audio output depending on the model
of television. The two settings are PCM and Raw.
10