Connections - Impecca DVHP-9117 Manuel De L'utilisateur

CONNECTIONS

When connecting this unit to other components, be sure that all devices are turned off. Audio/Video cables are
connected according to different color identification and should be fitted firmly into the appropriate jacks.
CONNECTING TO A TV USING THE STANDARD AUDIO/VIDEO CABLE
1. Connect the supplied RCA
Audio/Video cable using the
red(right) and white(left) cables
to the Audio jacks on the rear of
the DVD player and to the Audio
Inputs on your TV.
2. Connect the video cable
(yellow) to the Video jack on the
rear of the player to the Video
Input on your TV.
3. Set your TV to its appropriate
Video input
CONNECTING TO AN AMPLIFIER USING COAXIAL DIGITAL AUDIO OUTPUT
1. Connect the supplied RCA
Audio/Video cable using the red
and white cables to the Audio
jacks on the rear of the DVD
player and to the Audio Inputs
on your TV.
2. Connect the video cable
(yellow) to the Video jack on the
rear of the player to the Video
Input on your TV.
3. Connect a digital coaxial ca-
ble (not included) to the coaxial
cable jack on the rear of the
DVD player and to the coaxial
digital audio input on your digi-
tal receiver or amplifier.
CONNECTING TO TV THROUGH HDMI OUTPUT
1. Connect an HDMI cable to the
HDMI jack located on the rear of
the DVD player.
2. Connect an HDMI cable to the
HDMI Input jack on your televi-
sion.
DVD PLAYER
COAXIAL
RIGHT
HDMI
VIDEO
LEFT
VIDEO IN
AUDIO IN LEFT
AUDIO IN RIGHT
COAXIAL CABLE
DVD PLAYER
COAXIAL
RIGHT
HDMI
VIDEO
LEFT
VIDEO IN
AUDIO IN LEFT
AUDIO IN RIGHT
(HDMI CABLE NOT INCLUDED)
DVD PLAYER
COAXIAL
RIGHT
HDMI
VIDEO
LEFT
HDMI CABLE
7
TV
AMPLIFIER
TV
TV