Publicité
Installation
Installation
For the operation of the Network Camera, it is necessary to connect a network cable for
data transmission, power connection from supplied power adapter. Depending on opera-
tion methods, it is possible to connect an alarm cable additionally.
The dome camera should be attached to a structural object, such as hard wood, wall stud
or ceiling rafter that supports the weight of the dome camera. For its fixation on different
locations, please consult with an installer.
Installing and Adjusting Camera
1. Push the dome sides as shown in the following drawings to open the dome cover.
Push
Up
2. Using the template sheet make mounting holes and cable hole in the place (ceil-
ing or wall) to which the camera is to be installed.
3. Fix the bottom case to the mounting place using supplied Anchors (2x) and
Mounting Screws (2x).
6
Push
Top case
Bottom case & camera
Publicité
