Publicité
To Remove the Huggie
•
Loosen the screw using a small flat-blade screwdriver
such as an eyeglass screwdriver (Figure 10).
•
Remove the screw and set it aside.
•
Gently slide the Huggie out.
To Attach the Filler Plug
•
Gently push the Filler Plug into the open slot at the
bottom of the BTE Power Adapter.
•
Place the screw in the top of the Filler Plug.
•
Using a small flat-blade screwdriver, gently tighten the screw.
To Remove the Filler Plug
•
Loosen the screw.
•
Gently push on the screw until the Filler Plug is loosened and easy to grasp.
•
Gently pull the Filler Plug out.
•
Remove the screw.
Figure 10
13
Publicité
