Publicité
ENGLISH
OVERVIEW
1
2
3
4
5
1. Freezer
2. Control panel and Light
3. Glass Shelves
Note: Above picture is for reference only. Real
appliance probably is different.
Installation
Important! For electrical connection carefully
follow the instructions given in specific
paragraphs.
GB-8
6
4. Crisper Cover
5. Crisper
6. Balconies
• Unpack the appliance and check if there are
damages on it. Do not connect the appliance
if it is damaged. Report possible damages
immediately to the place you bought it. In that
case retain packing.
• It is advisable to wait at least four hours before
connecting the appliance to allow the oil to
flow back in the compressor.
• Adequate air circulation should be around the
appliance, lacking this leads to overheating.
To achieve sufficient ventilation follow the
instructions relevant to installation.
• Wherever possible the spacers of the product
should be against a wall to avoid touching or
catching warm parts (compressor, con- denser)
to prevent possible burn.
• The appliance must not be located close to
radiators or cookers.
• Make sure that the mains plug is accessible
after the installation of the appliance.
Service
• Any electrical work required to do the
servicing of the appliance should be carried
out by a qualified electrician or competent
person.
ENGLISH
GB-9
Publicité
