Publicité
OPERATING INSTRUCTIONS
MODEL DC6280AM1
Refer to drawing 10012418 at the end of this section for dimensions and connector locations.
Operation of the Model DC6280AM1 is quite simple. The input signal is fed into the jack (J1) marked
INPUT and the output is taken from the jack (J2) marked OUTPUT. The input connector is 7-16 (Male) and
the output connector is Type 7-16 (Female).
Forward coupled output is taken from the jack (J3) marked FWD, and Reverse coupled output is taken from
the jack (J4) marked REV. Both coupled output jacks on the unit are Type N female.
See Specification Sheet for detailed specification.
Rev -
Do not exceed maximum power ratings. Do not drop. Internal
components are fragile.
WARNING:
1
Publicité
