Publicité
OH 0285
PIT JACK 1T
Before returning this product for any reason (installation problem, instructions for use,
breakdown, manufacturing problem...), please contact us.
Contact :
You can reach us by mail sav@clas.com or by phone +33(0)4 79 72 69 18 or go directly to our
website clas.com
If you have changed your mind regarding your purchase, please return this product before you
attempt to install it.
INTRODUCTION
This jack is a removal hydraulic one that with the following advantage compact construction:light in
weight,long lift range,fast in lift,replaceable in connection part,firmly and reliable in connection of ADT and
so on.
It can be used when assembling and disassembling the removal parts and structural parts which need to be
lifted,descended transported. It is the ideal tool for assembling and repairing in motor repair shop, mobile
shop.
WARNING
Read and understand the instructions and instructions in this manual before use.
Do not exceed the rated capacity of the pit jack.
Check that the pit jack's lifting force is compatible with the weight of the vehicle.
Always make sure that you have sufficient working space to correctly manoeuvre around the pit jack.
Use the pit jack on a flat and solid surface capable of supporting the load.
Do not use in difficult conditions: snow, strong wind, heavy rain.
The pit jack is a lifting device only. Use support engine to support the vehicle parts.
Do not allow anyone to sit under the vehicle until it is supported by jack stands.
Centre the load on pit jack head before lifting.
Do not lift people.
Do not put the pit jack in contact with food.
Keep out of the reach of children.
It is strongly recommended to wear safety clothing (gloves, shoes).
The pit jack is made to lift part of vehicles, any other use that could lead to dangerous situations is forbidden.
No modifications must be made to the pit jack.
Failure to observe these warnings may result in personal injury or property damage.
Always inspect the pit jack before use. Do not use the pit jack if a malfunction is detected.
Do not store high up
Any modification of the product would result in the cancellation of the guarantee.
SPECIFICATIONS
• foot-operated
• chrome-plated piston diameter 35mm for the cylinder with reduction for the passage of the
head to 30mm.
• wheelbase length 780mm and width 630mm
• fast pedal: 15mm rise with each pedal stroke.
• overload protection
• downhill control: deadman type
• 4 castor wheels
WARNING
Publicité
