Publicité
STEP 34
Be sure the light plug wires (19d)
are secure in the wire saddle (16)
located on Top (C) through the
hole in the Upper Back Panel (F).
Do NOT cut into bed!
There are notches provided at
the back of your unit. These
notches are to fit around the
baseboard on your wall. If your
baseboard is higher or thicker
than the notches provided on the
unit, you will need to remove the
baseboard, cut it down to fit on
both sides of your unit, then
refasten to the wall.
ameriwoodhome.com
With the help of another person, place
your unit FLUSH against the wall
wire hole
wire saddle (16)
44
Publicité
