Publicité
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
ameriwoodhome.com
Before You Start
P
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
P
Parts are labeled on the surface or edge of the part
Give yourself enough room for the assembly process
P
Have the following tools: #2 Phillips Head
Screwdriver, Hammer, Level, Stud Finder, Pencil, Step Ladder, Rubber Mallet
P
and a Drill with 1/8" and 1/4" bits.
Caution: If using a power drill or power screwdriver for screwing, please be
aware to slow down and stop when screw is tight. Reduce torque setting to a
P
lower level so the drill will skip when the screw is tight. Failure to do so may
result in stripping the screw.
2
4
3
Publicité
