Télécharger Imprimer la page

Vortex Performance Tool W7901/E00002 Mode D'emploi page 2

Publicité

IMPORTANT SAFETY INFORMATION
CAUTION:
- Always operate the inflator in a well-ventilated area free of combustible materials, gasoline, or
solvent vapors.
- Always set parking/emergency brake and ensure vehicle is in park (or neutral if equipped with
manual transmission).
- Do not hold in hand while operating. Parts of the inflator can become hot during use.
- Never exceed the manufacturer's recommended pressure for any inflatable object.
- DO NOT OVER-INFLATE OBJECTS. Over inflation can cause personal injury and/or property
damage.
- For use with 12V power outlets rated 15 amps or higher. Do not use with older 8 amp cigarette
lighter receptacles.
NOTE:
- It is recommended that you operate your inflator with your vehicle's engine running to achieve the
optimal inflator performance.
- Never start a vehicle with the inflator plugged into the 12V power outlet.
- Place inflator on a hard, clean surface during operation.
- DO NOT use inflator continuously for more than 15 minutes. Allow unit to cool approximately 15
minutes between uses.
- Do not leave inflator unattended.
- While operating, never block the inflator input or output.
- ALWAYS use a pressure gauge to check tire pressure. DO NOT over-inflate.
- Soft inflatables (i.e. rafts, balls, etc.) may not have recommended pressure markings. Be careful
not to inflate items beyond their capacity.
- Do not attempt to disassemble inflator. There are no user serviceable parts inside.
- The only user serviceable part is the replaceable fuse.
- Keep inflator out of reach of children.
- This inflator is designed to inflate car tires, bike tires, ATV tires, sports balls, air mattresses, beach
toys and other inflatables.
- THIS INFLATOR IS NOT DESIGNED TO FILL AIR TANKS OR AIR SHOCKS.
SPECIFICATIONS:
Power Input .......................................................................................................... 12V Power Outlet
Cord Length ............................................................................................................................. 10 ft.
Maximum Pressure ................................................................................................................100 PSI
Gauge Type .......................................................................................................... Analog, 0-100 PSI
Hose Length ...................................................................................................... 24 in. Braided Hose
Time To Inflate Tire* (0-35 PSI) . .........................................................................................7 Minutes
Time To Inflate Tire* (25-35 PSI) . .................................................................................... 90 Seconds
CFM w/ no pressure .......................................................................................................... 0.53 CFM
Replacement Fuse . ..................................................................................................................... 15A
Duty cycle (mins) ......................................................................................................... 15 On/15 Off
Weight .....................................................................................................................................1.7 lb.
* Performance: based upon 195/65/R15 tire
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Publicité

loading