Publicité
EN
USE
Air outlets
Control panel
• Air inlets
• Hepa filters
• Pre-filters
On/Off
Press
to turn the fan on or off.
When switched off, the settings are memorized to be applied automatically when switching on again.
Mode Selection
Press
several times to choose the mode :
Normal : the fan speed is constant, it can be adjusted by pressing
Sleep: the speed decreases gradually to promote sleep, it can be adjusted by pressing
Smart : the fan speed automatically adapts to the room temperature that is displayed..
Ionizer: the air is purified thanks to the simultaneous action of the HEPA filter and the ionizer.
Speed Adjustment
Press repeatedly
Activate Oscillation
Press to
to activate oscillation.
Using the timer
When the appliance is on, press several times on
switching off of the appliance.
After 30 seconds of no action, the display goes into standby mode.
After 15 hours without action, the device switches off completely.
Mode
selection
to choose the speed. 1, 2, 3, ... , 10 is displayed.
20
Activate
On/Off
Oscillation
to set the duration (from 1h to 12h) until the automatic
62
On/Off
Activate
Oscillation
Mode
selection
• Speed
Adjustment
• Timer setting
Activate
Timer
Setting the
Speed
Timer
Adjustment
Publicité
