Publicité
• KRI (fornito separatamente)
Ricevitore per telecomando completo
di cavo per collegamento alla scheda
elettronica CMS.
• KRIM (fornito separatamente)
Ricevitore per telecomando completo
di cavo per collegamento alla scheda
elettronica CMS.
INTERFACCE SERIALI PER
CONTROLLI EVOLUTI
(FORNITI SEPARATAMENTE)
• KISI (fornito separatamente)
Interfaccia seriale CAN-bus (Controller
Area Network) per sistema iDRHOSS,
indispensabile per il collegamento in
rete delle unità ed il loro indirizzamento
seriale, da associarsi alla scheda elet-
tronica KCMS (Protocollo Can-Open).
• KRS485 (fornito separatamente)
Interfaccia seriale RS485 per dialogo
logico con building automation e siste-
mi di supervisione, da associarsi alla
scheda elettronica KCMS, (Protocol-
li supportati: protocollo proprietario;
ModBuS® RTU).
CONVERTITORI SERIALI
(FORNITI SEPARATAMENTE)
• KUSB (fornito separatamente)
Convertitore seriale RS485/USB per il
collegamento a sistemi di supervisio-
ne, da associarsi a uno o più moduli di
interfaccia seriale KRS485 nel caso di
gestione centralizzata delle unità.
• KGTW-BAC (fornito separatamente)
Gateway RS485/BACnet, fino a 64 di-
spositivi.
• KGTW-LON (fornito separatamente)
Gateway
RS485/FTT10-LonWorks,
fino a 64 dispositivi.
• KRI (supplied separately)
Receiver for remote control with ca-
ble for connection to the circuit board
CMS.
• KRIM (supplied separately)
Receiver for remote control with ca-
ble for connection to the circuit board
CMS.
SERIAL INTERFACE FOR
ADVANCED
CONTROLS (SUPPLIED
SEPARATELY)
• KISI (supplied separately)
iDRHOSS CAN-bus serial interface
(Controller Area Network, indispen-
sable for the network connection of
the units and their serial addressing,
which are to be associated with the
KCMS electronic board (Can-Open
Protocol).
• KRS485 (supplied separately)
RS485 serial interface for logical dia-
logue with building automation and
supervision systems, which is to be
associated with the KCMS electronic
board (Supported protocols: proprie-
tary protocol; ModBuS ® RTU).
SERIAL CONVERTERS
(SUPPLIED SEPARATELY)
• KUSB (supplied separately)
RS485/USB serial converter to con-
nect to supervisory systems and must
be associated to one or more KRS485
serial interface modules in the case of
centralised management of the units.
• KGTW-BAC (supplied separately)
Gateway RS485/BACnet, up to 64
devices.
• KGTW-LON (supplied separately)
Gateway
RS485/FTT10-LonWorks,
up to 64 devices.
72
• KRI (fourni séparément)
Récepteur pour la télécommande avec
le câble pour la connexion à la carte de
circuit imprimé CMS.
• KRIM (fourni séparément)
Récepteur pour la télécommande avec
le câble pour la connexion à la carte de
circuit imprimé CMS.
INTERFACES SÉRIES POUR
CONTRÔLES ÉVOLUÉS
(FOURNI SÉPARÉMENT)
• KISI (fourni séparément)
Interface port série CAN-bus (Controller
Area Network) pour système iDRHOSS,
indispensable pour la connexion au rése-
au des unités et de leur adresse port
série, à associer à la carte électronique
KCMS (Protocole Can-Open).
• KRS485 (fourni séparément)
Interface port série RS485 pour dialo-
gue logique avec building automation et
systèmes de supervision, à associer à
la carte électronique KCMS, (Protoco-
les supportés : protocole propriétaire ;
Modbus® RTU).
CONVERTISSEURS SÉRIELS
(FOURNI SÉPARÉMENT)
• KUSB (fourni séparément)
Convertisseur port série RS485/USB
pour la connexion au système de super-
vision, à associer à un ou plusieurs mo-
dules d'interface port série KRS485 si la
gestion de l'unité est centralisée.
• KGTW-BAC (fourni séparément)
Passerelle RS485/BACnet, jusqu'à 64
appareils.
• KGTW-LON (fourni séparément)
Passerelle
RS485/FTT10-LonWorks,
jusqu'à 64 appareils.
Publicité
