Publicité
Safety Information
The components included in this package are prone to damage from electrostatic
y
discharge (ESD). Please adhere to the following instructions to ensure successful
computer assembly.
Ensure that all components are securely connected. Loose connections may cause
y
the computer to not recognize a component or fail to start.
Hold the motherboard by the edges to avoid touching sensitive components.
y
It is recommended to wear an electrostatic discharge (ESD) wrist strap when
y
handling the motherboard to prevent electrostatic damage. If an ESD wrist strap
is not available, discharge yourself of static electricity by touching another metal
object before handling the motherboard.
Store the motherboard in an electrostatic shielding container or on an anti-static
y
pad whenever the motherboard is not installed.
Before turning on the computer, ensure that there are no loose screws or metal
y
components on the motherboard or anywhere within the computer case.
Do not boot the computer before installation is completed. This could cause
y
permanent damage to the components as well as injury to the user.
If you need help during any installation step, please consult a certified computer
y
technician.
Always turn off the power supply and unplug the power cord from the power outlet
y
before installing or removing any computer component.
Keep this user guide for future reference.
y
Keep this motherboard away from humidity.
y
Make sure that your electrical outlet provides the same voltage as is indicated on
y
the PSU, before connecting the PSU to the electrical outlet.
Place the power cord such a way that people can not step on it. Do not place
y
anything over the power cord.
All cautions and warnings on the motherboard should be noted.
y
If any of the following situations arises, get the motherboard checked by service
y
personnel:
Liquid has penetrated into the computer.
ƒ
The motherboard has been exposed to moisture.
ƒ
The motherboard does not work well or you can not get it work according to user
ƒ
guide.
The motherboard has been dropped and damaged.
ƒ
The motherboard has obvious sign of breakage.
ƒ
Do not leave this motherboard in an environment above 60°C (140°F), it may
y
damage the motherboard.
2
Safety Information
Publicité
