Sharp DR-P520 Manuel D'utilisation page 23

Display backlight timeout and
brightness
You can set the how the display backlight
behaves.
1. Enter the menu options and select <System
Settings> and then <Backlight>.
2. Use the and
option. Choose from: <Timeout> and <Dim
level>.
Timeout allows you to set the amount of time the
backlight remains on after no buttons are pressed.
Dim level allows you to adjust the brightness of
the displays backlight.
Note: The current setting will have a
Display language
You can set the language for the menus.
1. Enter the menu options and select <System
Settings> and then <Language>.
buttons to select an
.
2. Use the and
option. Options are: English, French, German,
Italian, Spanish, Polish and Dutch. Short press
the button to select the language.
Note: The current setting will have a
Software version
You can check the software version of your radio.
Enter the menu options and select <System>
and then <SW Version>. Short press the
button. The display will read the software version.
Factory reset
You can reset your radio to restore it to the
original factory settings.
NOTE: The product must be connected to the USB
charging cable to enable a Factory reset. If you reset
your radio all of your settings, including the radio
station list and any stored station presets will be
deleted.
EN
buttons to highlight an
.