Publicité
Les langues disponibles
Les langues disponibles
• Signal
• Power Status – e.g. Battery 95
NOTE: DAB display information operates in both
BestTune™ and DAB modes.
FM radio mode
You can deactivate BestTune™ by following the
steps in the BestTune™ section. This will allow you
to tune into DAB and FM stations independently,
Ensure the radio is in FM mode. If not, press the
button until the display confirms FM
mode.
If the radio was last tuned to an FM station before
being switched off, this station will auto-select
upon powering on.
Changing FM stations
Long press the
or
down the frequency band. The radio will search
for and stop at the next available station. Short
press
or
to fine-tune each frequency in
0.05MHz steps.
Change the scan setting
In FM mode:
Enter the menu options and select <Scan
setting>.
There are two different options to choose from:
• <Strong stations> The scan will only stop
when a strong signal strength is received, re-
sulting in better audio quality. It is possible that
the station you are scanning for may be missed
using this option.
• <All stations> The scan will stop at every
station it receives, even if the signal strength
is poor.
Use
and
to highlight your choice. Short
press
to confirm.
EN
buttons to scan up or
Publicité
