Publicité
I N S T A L L A T I O N P R O C E D U R E S
1
INSTALLING THE SPOUT
A. First of all, make sure you have three
holes in your deck installation.AND FOR
THE FUTURE MAINTENANCE, KEEP
ALWAYS AN AVAILABLE ACCESS TRAP
B. Remove the aerator (1).
C. At the bottom of the threaded tie
down tube, unscrew the hexagonal nut
(12) and take off the T connection.
D. Make sure that the large O ring (7) is
well inserted in the groove under the
flange. Mount the spout (2) into one of
the center deck holes.
Info Products: www.aquabrass.com
last revision: 05/21/2013
Ø1 3/8" MIN.
Ø1 1/2" MAX.
DRILLED
HOLE
34.9
1 3/8"
MAX
ATTENTION:
MAKE SURE TO FLUSH THE HOT AND COLD WATER
SUPPLY LINES BEFORE BEGINNING THE INSTALLATION.
7
12
E. From under the tub, mount the
rubber washer (8) and then the metal
2
washer (9) on the threaded tie down tube
(6) and thread all those with the tight
fitting nut (10). Position the spout (2)
directly perpendicular to the bath and
mount so that it clears the tub rim
properly.
1
T
F. Reinstall the T connection under the
spout .Screw on the hexagonal nut (12).
Tighten well.
geo 27418
ZG718- GG718
4-piece tub filler with handshower
Deckmount 4pc tub set
robinet de bain 4 morceaux avec douchette
Ø1 3/8" MIN.
Ø1 1/2" MAX.
DRILLED
HOLE
12
2
6
8
9
10
T
Updated 7-27-10
aquabrass.com
Publicité
